Assemble a battery to Capsule sensor
The capsule sensor is a global product, but because of international transportation, storage and other problems, default is no integrated battery inside the Capsule sensor.
After disassembling the sensor shell, you can see 2 pads on the round PCB at the bottom, and solder the battery positive and negative electrodes to this pad:
Battery specifications
In the capsule sensor, it’s already integrates a charge management circuit, but does not have an over-discharge protection circuit, so the lithium battery must have a protection circute. Battery must include following features:
Voltage: 3.7V
Charging voltage: 4.2V
Discharge cut-off voltage: ≤3.3V