Connect “STM32 + LoRa” to LoRaWAN Server

[English]

In this document, all operations and tests must be performed with a standard LoRaWAN Gateway, and at least have 8 channels!

Before this operation, please read this document carefully: “STM32 + LoRa” Node Preparation & Config Parameters .

 

Connect to TTN/TTS

Before that, make sure there is a LoRa Gateway active in your TTN/TTS account.

Register a device

Register a new device in TTN or TTS “Applications” page. Select the corresponding Brand, Model, Hardware Version, Firmware Version, Region.

Select the frequency plan, and fill in the corresponding AppEUI, DevEUi, AppKey, and register the device.

After registration is complete, if all is well, you will see the device active.

 

Connect to ChirpStack

Register a new device in ChirpStack’s “Applications” page. Enter the device name, description, DevEUI. Select Device-profile.

Enter the Application key of the device.

After registration is complete, if all is well, you will see the device active.

 

Important Hints

Please double check the following two things:

  1. The LoRaWAN parameters is the same as server;

  2. The listening frequency of your LoRa Gateway is the same as STM32 LoRa node’s sending frequency. We strictly follow [LoRaWAN™ 1.0.2 Regio