HT-HD01 Mesh Mode User Guide

[简体中文]

The HD01 supports Mesh networking mode, and you can even use it to achieve relay functionality. However, please note the following three points:

  • In this mode, one node must act as the MeshGate to connect to the upstream network, while the other nodes serve as MeshPoints.

  • In this mode, only devices with the same MeshID can communicate with each other.

  • The transmission rate decreases by 50% with each relay.

../_images/18.jpg

For configuration instructions, please refer to the following link:

HD01 Related Links: - Access Configuration Page - HaLow AP-STA