Config Parameter
Preparation
The configuration of LoRaWAN is detailed in various series of instructions, so make sure you read the following links, In this topic, we will focus on the difference between ABP and OTAA.
Tip
HT-AT62 and HT-RA62 please refer to STM32 Series LoRaWAN
Configure Parameters
Let’s take File -- Examples -- Heltec-Example -- LoRaWAN -- LoRaWAN as an example.
Enter the parameters to be configured for ABP in the positions marked in the following figure.
Enter false as shown below, which means that the code selects ABP.
Other options
There are some options in the Arduino Tools menu.
Tip
This section is the same as OTAA, please refer to the link given at the beginning of this topic depending on your device.
